fan storage heater - FXLi range
Technical Specification
Heat Retention
The core heat storage bricks are enclosed by insulation panels providing approximately 2.5 times more heat retention than conventional storage heaters.
Core Discharge
Achieved by a low noise centrifugal type fan drawing air through the hot core. The fan is switched by the room thermostat to allow heat output on demand.
Automatic Charging
Charging is regulated by a unique system monitoring both room temperature and the state of the storage core.
Boost Heating
Provided by a supplementary element which will only operate when the useful core heat is exhausted.
Internal Details
1 Insulation
Microporous silica and mineral wool.
2 Storage Core
High density bonded magnetite bricks (standard bricks as used on XL/XLS/CXLS heaters).
3 Heating Elements
Sheathed type.
4 Core Extract Fan
Low noise centrifugal type.
5 Direct Acting Heater
Integral fan boost element.
6 Supply Connection
Two supplies taken into heater for separate storage and fan circuits. Storage heater circuit connection and fan circuit connection all at right hand end of base (left side on FXL12i). Provision for left or right hand cable entry to all circuits.
IP Rating
IPX2
Controls
1 User Controls
Manually adjustable room temperature thermostat. On/Off switch for boost.
2 Installer Set Controls
For commercial applications, installer can permanently select higher fan speed for faster core heat extraction.
IP Rating
N/A.
Packing
1 Case Assembly and Weights
Containing assembled heater case and heating elements. Packed in single
carton.
| Model |
Weight without bricks |
Weight with bricks |
No. of bricks |
|---|---|---|---|
| FXL12i | 20kg | 80kg | 8 |
| FXL18i | 26kg | 116kg | 12 |
| FXL24i | 32kg | 152kg | 16 |
2 Storage Bricks
Supplied, 2 bricks per pack. Approx weight of each brick 7.5kg. (See above for weight of heater with and without bricks).
Finish
Front panel, sides and top panel – Willow White: Rear heat shield and wall spacer – contrasting Birch Grey.
Shelf
An attractive shelf is available in 2 lengths
| Model | FXL12i | FXL18i | FXL24i |
|---|---|---|---|
| Dimension A | 541mm | 769mm | 997mm |
| No. of slots | 3 | 4 | 5 |
| Model no. | FXL12i | FXL18i | FXL24i |
|---|---|---|---|
| Height | 700mm | 700mm | 700mm |
| Width | 560mm | 788mm | 1016mm |
| Depth | 183mm | 183mm | 183mm |
| Storage input loading | 1.7kW | 2.55kW | 3.4kW |
| Direct acting loading | 1.5kW | 1.5kW | 1.5kW |
| No. of bricks | 8 | 12 | 16 |
| Weight | 80kg | 116kg | 152kg |
| Shelf model no. |  | SHE18 | SHE24 |
† When using Dimplex shelves a clearance of 150mm must be maintained. The wall fixing arrangement is adjustable to accommodate for skirtings up to 150mm high and 25mm deep.
Name and Registered Office: Dimplex - a division of the GDC Group,
Millbrook House, Grange Drive, Hedge End, Southampton, Hants, SO30 2DF,
United Kingdom.
Company No.1313016
EEE Producer Registration Number WEE/GE0057TS
WEEE Distributor Take
Back Scheme - Registration ID: 6131
This is an official website of
GDC Group Limited. The GDC Group manages the Dimplex brand.
Neither
the GDC Group nor Dimplex are associated with any other website
containing the Dimplex brand name