
Calidou
Technical Specification
Controls

1 Function control
User selection of “comfort”, “background” (3.5oC below the thermostat setting) and “frost protection” (5oC), “off” and “programmed” operation (if programmer is fitted). Neon indicator shows function selected.
2 Thermostat dial
The dial is marked * to 9. The * setting represents a room temperature of approximately 5oC and may be used for protection against frost. The other settings range up to a maximum room temperature of approximately 35oC. A neon indicator shows when the element is operating.
3 Plug-in control modules
A range of optional plug in control modules are available for use with Calidou:
– Single zone pilot wire programmer (RX9911) controls up to 20 slave heaters linked via pilot wire. Provides 7 day control, switching heater between comfort and setback mode. Can be removed from heater for easy programming.
– Single zone mains borne signalling programmer (RX9912) controls
multiple slave heaters, with RX9913 MBS receivers fitted to each slave.
Provides 7 day control, switching heater between comfort and setback
modes.
Multi Zone Control
Compatible with Dimplex 4-zone pilot wire and mains borne signalling controllers (RX9913 receivers required for MBS systems).
Elements
Printed circuit element fixed to the inside of the front panel, covering the whole fascia. One or two mineral filled sheathed elements encased in cast iron mounted dampening bushes on rear panel to avoid expansion noise. Heat deflector shields also cover front and back of elements.

Heat Distribution of Elements
| Model | CAL075 | CAL100 | CAL150 | CAL200 |
|---|---|---|---|---|
| Front Panel | 150W | 200W | 300W | 400W |
| Cast Iron Elements | 1 x 600W | 1 x 800W | 2 x 600W | 2 x 800W |
Construction
Galvanised steel body coated with polymerised polyester epoxy.
IP Rating
Splash-proof IPX4 for use in wet areas.
Installation
A detachable wall mounting frame allows quick wall fixing.
Electrical Connections
2m 4-core cable (live, neutral, earth and pilot wire) supplied fitted to each heater.

| Model No. | Loading | Height | Width (A) | Depth | X | Y | Z | Weight |
|---|---|---|---|---|---|---|---|---|
| CAL075 | 0.75kW | 604mm | 455mm | 142mm | 140 | 87 | 228 | 17kg |
| CAL100 | 1.0kW | 604mm | 621mm | 142mm | 300 | 87 | 234 | 24kg |
| CAL150 | 1.5kW | 604mm | 870mm | 142mm | 400 | 226 | 242 | 33kg |
| CAL200 | 2.0kW | 604mm | 1202mm | 142mm | 700 | 227 | 275 | 47kg |
Electronic Control
Dimplex electronic panel heaters feature highly accurate electronic thermostats, providing superior comfort and operating efficiency. As the room temperature nears the desired set point, power to the elements is reduced, and the room temperature closely monitored to an accuracy of less than 0.1oC, minimising overshoot and temperature drift, resulting in better energy-efficiency and user comfort.

Being electronic, control is totally silent and reliable.
Name and Registered Office: Dimplex - a division of the GDC Group,
Millbrook House, Grange Drive, Hedge End, Southampton, Hants, SO30 2DF,
United Kingdom.
Company No.1313016
EEE Producer Registration Number WEE/GE0057TS
WEEE Distributor Take
Back Scheme - Registration ID: 6131
This is an official website of
GDC Group Limited. The GDC Group manages the Dimplex brand.
Neither
the GDC Group nor Dimplex are associated with any other website
containing the Dimplex brand name

