INSTALLED HEATING - STORAGE HEATERS

FXL range

Technical Specification

Heat Retention

The core heat storage bricks are enclosed by insulation panels providing approximately 2.5 times more heat retention than conventional storage heaters.

Core Discharge

Achieved by a low noise centrifugal type fan drawing air through the hot core. The fan is switched by the room thermostat to allow heat output on demand.

Automatic Charging

Charging is regulated by a unique system monitoring both room temperature and the state of the storage core.

Boost Heating

Provided by a supplementary element which will only operate when the useful core heat is exhausted.

Internal Details

1 Insulation

Microporous silica and mineral wool.

2 Storage Core

High density bonded magnetite bricks (standard bricks as used on XL/XLS/CXL/CXLS heaters).

3 Heating Elements

Sheathed type.

4 Core Extract Fan

Low noise centrifugal type.

5 Direct Acting Heater

Integral fan boost element.

6 Supply Connection

Two supplies taken into heater for separate storage and fan circuits. Storage heater circuit connection and fan circuit connection all at right hand end of base. Provision for left or right hand cable entry to all circuits.

† When using Dimplex shelves a clearance of 150mm must be maintained. The wall fixing arrangement is adjustable to accommodate for skirtings up to 150mm high and 25mm deep.

Controls

1 User Controls

Manually adjustable room temperature thermostat. On/Off switch for boost.

2 Installer Set Controls

For commercial applications, installer can permanently select higher fan speed for faster core heat extraction.

IP Rating

N/A.

Packing

1 Case Assembly and Weights

Containing assembled heater case and heating elements. Packed in single carton.

Model Weight
without
bricks 		Weight
with
bricks 		No.
of
bricks
FXL18 26kg 120kg 12
FXL24 32kg 157kg 16

2 Storage Bricks

Supplied, 2 bricks per pack. Approx weight of each brick 7.5kg. (See above for weight of heater with and without bricks).

Finish

Front panel, sides and top panel – Willow White: Rear heat shield and wall spacer – contrasting Birch Grey.

Shelf

An attractive shelf is available in 2 lengths

Model FXL18 FXL24
Dimension A 769mm 997mm
No. of slots 4 5


Model no. FXL18 FXL24
Height 700mm 700mm
Width 788mm 1016mm
Depth 183mm 183mm
Storage input loading 2.55kW 3.4kW
Direct acting loading 1.5kW 1.5kW
No. of bricks 12 16
Weight 120kg 157kg
Shelf model no. SHE18 SHE24

Name and Registered Office: Dimplex (UK) Limited, Millbrook House, Grange Drive, Hedge End, Southampton, Hants, SO30 2DF, United Kingdom.
Company No.1313016 EEE Producer Registration Number – WEE/GE0057TS