XL/XLS Range
Technical Specification
Construction Details
Galvanised finish sheet steel base, mounted on steel feet, supporting double skin front and outer panels. One piece front panel/grille assembly and front inner skin remove for brick loading.
Internal Details
1 Storage Core
Material: High density bonded magnetite bricks.
2 Heating Element
Type: Incoloy sheathed in units of 850W.
3 Thermal Insulation
Type (a) Front and Rear Panels – microporous silica.
Type (b) Top and Ends – resin free mineral wool.
Type (c) Base – calcium silicate slab.
4 Supply Connection
Located at front right hand end of base – accessible by removal of front
panel assembly. Hidden cable support straps at rear of heater allow neat
supply cable connection from either side of heater.
5 Assembly
Remove front panel assembly then front inner skin. Remove internal
packing containing elements, position rear layer of bricks, heating
elements, and front layer of bricks.
Controls
The control knobs are positioned on the sloping rear top panel of the
heater, and are therefore out of sight of young children. The knobs
incorporate a cross bar and raised pointer for ease of operation.
1 Charge Controller – XL
Type: Bi-metal, adjustable from zero charge to fully charged condition
2 Charge Controller – XLS
Type: Hydraulic close differential room temperature sensing thermostat
with external sensor.
3 Thermal Safety Device
Type: Bi-metal – manual reset.
4 Damper Control
Type: Bi-metal strip, selection variable from early to late or zero boost
| Model |
Dimension A | No. of Slots |
|---|---|---|
| XL12/XLS12 | 542mm | 4 |
| XL18/XLS18 | 770mm | 5 |
| XL24/XLS24 | 998mm | 6 |
Packing
1 Case Assembly and Weights
Containing assembled heater case and heating elements. Packed in single
carton.
2 Storage Bricks
Supplied, 2 bricks per pack. Approx weight of brick 7.5kg each. (See
above for weight of heater with and without bricks).
| Model |
Weight without bricks |
Weight with bricks |
No. of bricks |
|---|---|---|---|
| XL12/XLS12 | 20kg | 76kg | 8 |
| XL18/XLS18 | 26kg | 109kg | 12 |
| XL24/XLS24 | 32kg | 144kg | 16 |
IP Rating
Drip-proof IPX2.
Finish
Front panel, sides and top panel – Willow White; rear heat shield, wall spacer and grille – contrasting Birch Grey.
Shelf
An attractive shelf is available in 3 lengths.
| Model | XL12/XLS12 | XL18/XLS18 | XL24/XLS24 |
|---|---|---|---|
| Performance / Input rating | 1.70kW | 2.55kW | 3.4kW |
| Charge Acceptance(7hr continuous) | 11.9kWh | 17.85kWh | 23.8kWh |
| DIMENSIONS Height (A) | 706mm | 706mm | 706mm |
| Width (B) | 565mm | 793mm | 1021mm |
| Depth (C) | 146mm | 146mm | 146mm |
| Installed Weight | 76kg | 109kg | 144kg |
| Shelf Model No. | SHE12 | SHE18 | SHE24 |
† XLS Models
Name and Registered Office: Dimplex - a division of the GDC Group,
Millbrook House, Grange Drive, Hedge End, Southampton, Hants, SO30 2DF,
United Kingdom.
Company No.1313016
EEE Producer Registration Number WEE/GE0057TS
WEEE Distributor Take
Back Scheme - Registration ID: 6131
This is an official website of
GDC Group Limited. The GDC Group manages the Dimplex brand.
Neither
the GDC Group nor Dimplex are associated with any other website
containing the Dimplex brand name