BFH range

Technical Specification

Controls

1 All Models:

Thermostat control knob on front of heater with a temperature range of approximately 5°C to 30°C. Lowest setting provides frost protection level.

2 Remote Control Models

BFH24BWSR:

Switch Panel – 13 amp fuse, double pole isolating switch, two single pole ON/OFF switches controlling elements.

3 Integral Control Models

BFH24BWST:

Built-in switches on heater fascia on/off, fan only. 3 heat settings. Neon indicator.

Elements – All Models

Fully strung, helically wound, 800W and 1600W combine to give 2400W maximum output.

Thermostat – All Models

Bi-metal type, air temperature sensing.

Electrical Connections

1 Remote Control Models:

2.5 metre 6-core colour coded cable is supplied for connecting the heater to the switch panel. The installer must supply suitable conduit or trunking if required and a surface or flush mounting box for the switch panel. A list of suitable standard boxes is supplied with the heater.

2 Integral Control Models:

Supplied with 2m 3-core cable.

Thermal Safety Device

Interrupt supply to reset type.

Colour

All units supplied with a choice of white, dark brown and stainless steel fascias.

Installation

Minimum back box depth of 40mm is required behind fascia plate.

Note:

If fitted in corner with adjacent cupboards to right hand side of heater then a distance of at least 150mm must be maintained between the right hand end of the heater and the front of the adjacent cupboard door as shown.

Name and Registered Office: Dimplex - a division of the GDC Group, Millbrook House, Grange Drive, Hedge End, Southampton, Hants, SO30 2DF, United Kingdom.
Company No.1313016 EEE Producer Registration Number WEE/GE0057TS
WEEE Distributor Take Back Scheme - Registration ID: 6131
This is an official website of GDC Group Limited. The GDC Group manages the Dimplex brand.
Neither the GDC Group nor Dimplex are associated with any other website containing the Dimplex brand name