KITCHENS AND BATHROOMS - BASE UNIT HEATERS
'wet' system BUH range
Technical Specification
Controls
Built-in single pole winter/summer switch and two position boost/low switch. Low temperature cut-out thermostat set at 38ºC. Facility for fan only operation.
Connections
Pre-wired with 2m 3-core electrical cable. Supplied with flexible hoses and isolating valves to connect the unit’s copper pipes to the flow and return pipes of the central heating system.
Finish
Supplied complete with a choice of stainless steel, powder coated brown or white finishes.
If the overhang above the heater is greater than 75mm, then a distance of at least 100mm must be maintained between the overhang and the uppermost part of the heater.
| Model | Fan Speed | Power | Water | |||
|---|---|---|---|---|---|---|
| Normal | Boost | Consumption Watts | Capacity Litres | |||
| (Btu/h) | Watts | (Btu/h) | Watts | |||
| BUH19B/W/S | 4372 | 1280 | 6830 | 2000 | 31 | 0.2 |
Installation/Dimensions (mm)
- Accessibility
- Terms of use
- Privacy policy
- Patents & Statements
- Disclaimers
- Certification
- Environmental policy
- All rights reserved ©2007 Dimplex UK Ltd
Name and Registered Office: Dimplex (UK) Limited, Millbrook House,
Grange Drive, Hedge End, Southampton, Hants, SO30 2DF, United Kingdom.
Company
No.1313016
EEE Producer Registration Number – WEE/GE0057TS