KITCHENS AND BATHROOMS -BATHROOM RADIATORS

Apollo range

Technical Specification

Controls

1 Function control

User selection of “comfort”, “background” (4ºC below the thermostat setting) and “frost protection” (5ºC), off and programmed operation (if programmer is fitted). Neon indicator shows function selected.

2 Thermostat Dial

The dial is marked * to 9. The * setting represents a room temperature of approximately 5ºC and may be used for protection against frost. The other settings range up to a maximum room temperature of approximately 35ºC. A neon indicator shows when the element is operating.

3 Plug-in control modules

A range of optional plug in control modules are available for use with Apollo:

– Single zone pilot wire programmer (RX9911) controls up to 20 slave heaters linked via pilot wire. Provides 7 day control, switching heater between comfort and setback mode. Can be removed from heater for easy programming.
– Single zone mains borne signalling programmer (RX9912) controls multiple slave heaters, with RX9913 MBS receivers fitted to each slave. Provides 7 day control, switching heater between comfort and setback modes.

Multi Zone Control

Compatible with Dimplex 4-zone pilot wire and mains borne signalling controllers
(RX9913 receivers for MBS systems).




Model No. Loading Height Width Y Weight
APL100 1.0kW 830mm 440mm 468mm 7.2kg

Elements

Two mineral filled sheathed electric elements are embedded in aluminium heating plates. Low element operating temperature of around 200ºC reduces air drying effects and dust burning. The heating plates have a unique design – the forward face is finished in matt black and has greater surface area to maximise radiant heat. The reverse side is in its natural smooth aluminium state to minimise heat loss to the wall. The design provides an even temperature across the front panel, using the whole surface area available and maximises the throw of radiant heat into the room.

IP Rating

Splash-proof IPX4 for use in wet areas.

Construction

Durable polyester powder coated steel with mesh steel front grille.

Installation

A detachable wall-mounting frame allows quick wall fixing.

Electrical Connections

2m 4-core cable (live, neutral, earth and pilot wire) supplied fitted to each heater.

Colour/Finish

White.

Electronic Control

Dimplex electronic panel heaters feature highly accurate electronic thermostats, providing superior comfort and operating efficiency. As the room temperature nears the desired set point, power to the elements is reduced, and the room temperature closely monitored to an accuracy of less than 0.3ºC, minimising overshoot and temperature drift, resulting in better energy-efficiency and user comfort. Being electronic, control is totally silent and reliable – performance will not deteriorate even over many year’s use.

Name and Registered Office: Dimplex (UK) Limited, Millbrook House, Grange Drive, Hedge End, Southampton, Hants, SO30 2DF, United Kingdom.
Company No.1313016 EEE Producer Registration Number – WEE/GE0057TS