KITCHENS AND BATHROOMS - TOWEL RAILS

Technical Specification

Controls

No external controls. Built-in temperature limiter and overheat protection. Suitable for connection to external thermostats or timers, in

accordance with IEE regulations.

Finish

White powder coated or chrome plated.

Construction

Sealed, liquid filled steel shell. Water based fluid with glycol frost/corrosion inhibitor. Vertical mounted immersion element.

IP Rating

Splash-proof IPX4 for bathroom use.

Installation

Supplied with wall mounting points and brackets.

Electrical Connection

1 metre of electrical cable pre-fitted. Cable entry at base of left header tube. Installations must be in accordance with current IEE wiring regulations.

Installation to Radiator Circuit

Installation must be in accordance with manufacturer's instructions. Liquid is drained by removing bungs to inlet/outlet connections (1/2" BSP fittings). Connect to radiator circuit (electric element remains in situ). Radiator refilled from radiator circuit and bled using valve concealed below top right header cap. Electrical connection as electric only installation.

Operation when part of Radiator Circuit

When the central heating system is in use the appliance will act as a normal radiator. Out of season or when the boiler is not in use the radiator may be operated independently by switching on the electric element. In use expansion of water must be guaranteed through return connection. Return connection should be left open to ensure this.

 * For BTU output multiply by 3.412