The CAB20ER provides a powerful curtain of electrically heated air across an open door to prevent warm or cool air escaping, minimising energy losses and maximising comfort. This model recesses into a ceiling void for a seamless, non-intrusive look. All models can be joined together and operated from one controller for maximum flexibility.
A comprehensive range of electronically controlled air curtains suited to commercial applications. The CAB range provides a powerful curtain of air across an open door to prevent warm or cool air escaping, minimising energy costs whilst maximising comfort and convenience. All models can be joined together and operated from one controller for maximum flexibility.
High output air stream for entrances up to 3m high.
Energy saving thermostatic controls*.
Modular recess design for seamless run of grilles over any door width.
Electronic control system with full heat, half heat and fan only settings*.
Electronic fan over-run control when used with compatible door sensors†.
Full (BMS) Building Management System Interface.
Separate wall controls able to control up to ten units as a system.
‘Easy connect’ control system gives single point control over multiple air curtains.
Wall mounted controls included as standard.
Electric models can be modified for single phase connection at reduced outputs.
*dependant on model. † requires additional door contact (not supplied)
Hard wired double gang sized control panel for recessed or surface mounting. Electronic low voltage. Supplied with wall controls connected via CAT5 patch cables with RJ45 terminations. (data signals only) Master/slave (daisy-chain) connection for single
Heat Output (kW)
Low / High
Wall mounted via easy-fit bracket or suspended with suspension rods
8mm threaded drop rod (not supplied). Integral bracket (supplied). 2 cable entry points