Description
The VFMi range of fan storage heaters blends all the benefits of using low-tariff electricity with a highly insulated heater to give maximum controllability over heat delivered.
Internal Details
Storage Core
Material: High density bonded magnesite bricks.
Heating Elements
Type: Incoloy sheathed, 3 elements per heater.
Thermal Insulation
Front and Rear Panels – microporous silica.
Top – microporous silica.
Base and sides – vermiculite.
Supply Connection
Located at right hand side to rear of heater – accessible by removal of side panel assembly. 240V 1 phase or 415V 3 phase. Note: Heat resistant cable required for connection to heater.
Installation
A secure wall fixing is required for all heaters with suitable connection to the fixed wiring of the premises.
Construction Details
Galvanised sheet steel base, mounted on pressed steel feet. Side panels, front panel/air outlet grille assembly and inner skin removable for brick loading.
Controls
Charge Controller Type: Hydraulic, manually adjustable from zero charge to fully charged condition.
Thermal Safety Device
Type: Bi-metal – automatic reset.
Output Control
Type: Integral room temperature sensing hydraulic thermostat fitted at installation stage. Accurate to ±1°C. Temperature range approximately 5°C to 30°C. On/Off switch for fan. On/Off switch with neon for direct acting heating element (option).
Electrical Supply
240V single phase (415V 3 phase option may be selected on installation).
Packaging
VFM24i – approx. weight 44kg.
VFM32i – approx. weight 51kg.
VFM40i – approx. weight 57kg.
VFM48i – approx. weight 63kg.
Storage Bricks
Packed separately in packs of 3 (see table for weight of product with bricks). Pack Part No. 007781 approx. weight 16.7kg.
Colour/Finish
Front panel, top panel, side panels – RAL9016 – Traffic White.
Grille – Birch Grey.