Heat pump for heating and cooling purposes for outdoor installation with wall-mounted heat pump manager and two compressors for output control in partial load operation. Sound-optimised by electronically controlled fans and an encapsulated compressor housing with free-swinging compressor baseplate for solid-borne sound insulation. High coefficients of performance (COP) through high-performance evaporator and compliance with the requirements of EN 14511 for larger volume flows on the heat consumption side.
Optimised heating and cooling operation via an external four-way reversing valve which is activated by the controller (special accessory). High operational safety through sensor monitoring of the refrigeration circuit for energy-efficient defrosting; integrated thermal energy metering (display of the thermal energy volume for heating and domestic hot water preparation on the WPM EconR-E heat pump manager). Reversible refrigeration circuit with additional heat exchanger for higher domestic hot water temperatures in heating operation and waste heat recovery in cooling operation. Access for service work on the outlet side; the minimum clearances must be observed for installation close to walls. Can be easily transported with a lift truck (accessible from underneath) or lifting lugs. Universal design with flexible expansion options for: Bivalent or bivalent-renewable operating mode Combined distribution systems for heating and cooling Unmixed and mixed heating and cooling circuit
Outside - The LA TUR+ range uses a three phase electricity supply, making them suitable for a range of non-domestic/ commercial applications with heating/cooling load demands up to 35kW. Multiple heat pumps can be installed in parallel if required.