Hot Water Heat Pumps

A low carbon, RF enabled, energy efficient solution, utilising air source heat pump technology to provide hot water to residential dwellings.

Find an Installer
A low carbon, RF enabled, energy efficient solution, utilising air source heat pump technology to provide hot water to residential dwellings.

 

Why choose hot water heat pumps?

High renewable contribution

Listed in SAP Appendix Q, offering a high renewables contribution in SAP

High COP

A COP of up to 3.36 (according to EN16147)

Flexible placement

Suitable for installation within service cupboards, garages and utility rooms

Low operational noise

A high-performance rotary compressor mounted on anti-vibration pads reduces operational noise

5 year guarantee

Available in a 200L or 270L volume, stainless-steel cylinder, guaranteed for 5 years

Defrost mode

A built in defrost mode makes it suitable for use in temperatures between -7 and 35°C

Featured product

Edel Hot Water Heat Pump

With a COP of up to 3.36, our Edel RF Hot Water Heat Pump (HWHP) is a low carbon technology for heating hot water. The heat pump collects energy from the air and converts this into heat, which is then transferred to the water within the cylinder – creating hot water up to 60°C.

Explore edel
With a COP of up to 3.36, our Edel RF Hot Water Heat Pump (HWHP) is a low carbon technology for heating hot water. The heat pump collects energy from the air and converts this into heat, which is then transferred to the water within the cylinder – creating hot water up to 60°C.

Product specification

Our hot water heat pump solution is often specified alongside direct acting panel heaters and is available in two sizes:

Edel RF Hot Water Heat Pump – 170L

Controls

fully integrated control giving a standalone solution. RF enabled cylinder when connected to a Dimplex hub, app controls allows visibility of energy use, the amount of water heated and pro-active adjustments

COP

2.85

Maximum power input (heat pump and immersion)

350 + 1200 = 1550W

Air Operating Range

-7°C to +35°C

Unit Size (mm)

W: 520mm H 1760mm

Standing heat loss kWh/24h

1.92

Air ducting method

Concentric Duct

Heat up from cold (10°C)

10hr 24mins

Air flow rate range m 3 /h

90 to 140

Edel RF Hot Water Heat Pump – 200L

Controls

fully integrated control giving a standalone solution. RF enabled cylinder when connected to a Dimplex hub, app controls allows visibility of energy use, the amount of water heated and pro-active adjustments

COP

3.36

Maximum power input (heat pump and immersion)

700 + 1200 = 1900W

Air Operating Range

-7°C to +35°C

Unit Size (mm)

630 (W) x 1460 (H))

Standing heat loss kWh/24h

1.61

Air ducting method

Separate inlet and outlet to exterior